Jesus Gracia
Yuma
Summary
Adaptable professional with a quick-learning ability and a talent for adjusting to new environments. Skilled in rapidly acquiring new knowledge and applying it effectively. Driven by a passion for continuous learning and successfully navigating change. Highly-motivated employee with desire to take on new challenges. Strong work ethic, adaptability, and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills. Reliable Feed Truck Driver known for being highly productive and efficient in completing tasks. Possess specialized skills in route planning, livestock nutrition knowledge, and vehicle maintenance ensuring smooth operations. Excel at time management, problem-solving, and communication, which are vital for meeting delivery schedules and maintaining customer satisfaction.
Overview
28
28
years of professional experience
Work History
Feedtruck Driver
Cobalt Cattle
Yuma
04.2019 - Current
- Reported any problems encountered while operating the vehicle immediately to management.
- Demonstrated safe driving by observing road rules, exercising caution in unfamiliar areas and maintaining vehicle control.
- Drove vehicles safely, obeying traffic laws and transportation procedures to avoid accidents.
- Inspected vehicle for mechanical items and safety issues prior to operating.
- Conducted pre-inspections to keep trucks reliable and well-maintained.
- Worked effectively in team environments to make the workplace more productive.
- Collaborated closely with team members to achieve project objectives and meet deadlines.
- Provided support and guidance to colleagues to maintain a collaborative work environment.
Sheet Metal Mechanic
Brownsville Sheet Metal
Brownsville
03.2008 - 03.2019
- Operated various hand tools such as grinders, saws, riveters and drills.
- Fabricated and adjusted component parts with shop and on-site tools.
- Interpreted blueprints to determine dimensions of the finished product.
- Inspected completed work for accuracy against measurements taken during fabrication process.
- Maintained cleanliness in the shop area by disposing scrap metals properly.
- Achieved maximum efficiency by working with large crews to install ductwork in existing and new builds.
- Fabricated sheet metal components using shears, brakes, punches and drill presses.
- Interpreted blueprints and schematics to determine duct placement.
- Dismantled old systems prior to disposal in accordance with safety regulations.
- Operated heavy machinery to prepare metal products according to customer specifications.
- Assembled sheet metal parts with screws, bolts or spot welds.
- Followed safety protocols while working with hazardous materials such as adhesives or solvents.
- Inspected existing systems to identify maintenance needs and plan skilled repairs.
- Verified product quality by checking products for accuracy and completing necessary adjustments.
- Installed ventilation systems in commercial buildings per code requirements.
- Performed preventative maintenance on all shop equipment as needed.
- Planned layout and installation of complete HVAC systems according to specifications.
- Assisted in training new employees in the use of shop tools and equipment safely.
- Installed insulation and liners into ducts for air conditioning systems.
- Repaired existing systems by replacing worn out parts or components.
- Fabricated and altered parts with metal hammers, punches, drills and shears.
- Used power tools to grind, sand and polish metals, plastics and wood products.
- Measured, cut and formed sheet metal products to fabricate ductwork.
- Performed quality control checks on all finished products before delivery to customers.
- Built and installed complete systems according to standards and customer specifications.
- Calculated bend allowances and spring back to ensure proper fit of parts.
- Managed household errands and other essential duties.
- Demonstrated strong problem-solving skills, resolving issues efficiently and effectively.
- Collaborated closely with team members to achieve project objectives and meet deadlines.
- Operated a variety of machinery and tools safely and efficiently.
- Provided support and guidance to colleagues to maintain a collaborative work environment.
- Worked effectively in team environments to make the workplace more productive.
- Promoted high customer satisfaction by resolving problems with knowledgeable and friendly service.
- Completed day-to-day duties accurately and efficiently.
- Maintained updated knowledge through continuing education and advanced training.
Sheet Metal Duct Installer
Thirlwall's Sheet Metal
Brownsville
03.1999 - 02.2009
- Performed regular maintenance checks on tools and equipment used during installation process.
- Fabricated and altered parts with metal hammers, punches, drills and shears.
- Set up ladders or scaffolding when working at heights above ground level.
- Interpreted blueprints and schematics to determine duct placement.
- Mounted grilles and diffusers into walls or ceilings as needed.
- Cleaned work area upon completion of each job assignment.
- Achieved maximum efficiency by working with large crews to install ductwork in existing and new builds.
- Ensured that all safety regulations were followed during installation process.
- Placed insulation on pipes and fittings according to customer requirements.
- Connected exhaust hoods, fans, dampers, and other accessories as required.
- Inspected installed systems for conformance to job specifications.
- Secured ductwork with screws or rivets at designated points along its length.
- Installed metal ducts in accordance with blueprints and specifications.
- Communicated effectively with team members throughout job assignments.
- Applied sealants to joints and seams of the system as necessary.
- Operated heavy machinery to prepare metal products according to customer specifications.
- Used power tools to grind, sand and polish metals, plastics and wood products.
- Measured, cut, shaped, and connected sheet metal ducts to form complete systems.
- Performed finishes by trimming and deburring to create smooth surfaces and joints of assembled parts.
- Repaired faulty installations by replacing worn parts or sections of the system.
- Verified product quality by checking products for accuracy and completing necessary adjustments.
- Adjusted system components for proper fit and function.
- Removed old insulation from ducting prior to installation of new materials.
- Drilled holes in ductwork for mounting supports and hangers.
- Managed household errands and other essential duties.
- Contributed innovative ideas and solutions to enhance team performance and outcomes.
- Provided support and guidance to colleagues to maintain a collaborative work environment.
- Completed day-to-day duties accurately and efficiently.
- Managed time effectively to ensure tasks were completed on schedule and deadlines were met.
- Operated equipment and machinery according to safety guidelines.
- Collaborated closely with team members to achieve project objectives and meet deadlines.
Construction Worker
Neri Construction
Brownsville
01.1997 - 01.1999
- Cleaned or prepared construction sites to eliminate hazards.
- Performed demanding physical work over extended periods and modeled positive attitude.
- Assisted with diverse construction challenges to help team and customer.
- Conducted regular maintenance checks on all tools used during construction process ensuring that they were properly functioning at all times.
- Cleaned job sites daily removing debris, dirt and hazardous materials safely.
- Maintained clean, safe working environment by removing debris from job site prior to shift completion.
- Operated a variety of tools to excavate, move and grade earth for foundations, trenches and roads.
- Worked effectively in team environments to make the workplace more productive.
Education
High School Diploma -
CBTIS #135
Matamoros Tamaulipas07-1994
Secundaria - Dibujo Tecnico Industrial
Secundaria Tecnica #4
Matamoros Tamaulipas07-1991
Primaria -
Adalberto J Arguelles
Matamoros Tamaulipas07-1988
Some College (No Degree) - Ingenieria Electronica
Instituto Tecnologico De Matamoros
Matamoros TamaulipasSkills
- Vehicle inspection
- Team collaboration
- Vehicle maintenance
- Attention to detail
- Food delivery
- Professionalism
- Clean driving record
- Spanish fluency
- Problem-solving
- Self motivation
- Basic math skills
- Incident reporting
- Analytical skills
- Safety compliance
- Preventative maintenance
- Verbal and written communication
- Accident reports
Languages
Spanish
Professional
English
Limited
Timeline
Feedtruck Driver
Cobalt Cattle
04.2019 - Current
Sheet Metal Mechanic
Brownsville Sheet Metal
03.2008 - 03.2019
Sheet Metal Duct Installer
Thirlwall's Sheet Metal
03.1999 - 02.2009
Construction Worker
Neri Construction
01.1997 - 01.1999
High School Diploma -
CBTIS #135
Secundaria - Dibujo Tecnico Industrial
Secundaria Tecnica #4
Primaria -
Adalberto J Arguelles
Some College (No Degree) - Ingenieria Electronica
Instituto Tecnologico De Matamoros
Similar Profiles
Doron BrooksDoron Brooks
Inside Sales Account Manager at Cobalt Communications, Inc. Contact CobaltInside Sales Account Manager at Cobalt Communications, Inc. Contact Cobalt
Jacob GreeneJacob Greene
Team Lead at Cobalt BoatsTeam Lead at Cobalt Boats
Frankie BruceFrankie Bruce
Mold Maintenance Technician at Cobalt BoatsMold Maintenance Technician at Cobalt Boats