Daniel Caraveo

• For sage I did aerial and underground work for coax and fiber any pain need to be done to bring the service back up so I compose climbing bucket tricks ladders anything needed to perform the job at the underground excavating used minis skiers and anything needed to move from the job of repairing concrete breaking concrete and repairing asphalt or anything to perform the job with the trenching pipe setting anything to run coax and fiber underground
• Bc Followed established guidelines for handling hazardous waste material safely.
• Assessed environmental impact of mining activities through soil samples analysis.
• Performed maintenance activities on underground vehicles, such as changing oil or replacing filters.
• Maintained cleanliness at all times throughout the entire worksite premises.
• Responded to emergency situations quickly and efficiently while adhering to all safety protocols.
• Managed inventory levels of spare parts needed for repair work in the mines.
• Identified potential problems with mechanical components prior to failure occurring.
• Maintained accurate records of mining activity, including shift logs and production reports.
• Ensured proper storage of explosives and chemicals used in underground operations.
• Loaded supplies onto trucks for delivery into the mine shafts using a crane or forklift.
• Conducted daily safety inspections of underground equipment and machinery.
• Supervised the use of heavy equipment such as loaders, bulldozers, backhoes.
• Provided guidance and instruction to new employees about operating procedures.
• Operated underground mining production equipment in a safe and efficient manner.
• Liaised with supervisors regarding safety issues or operational concerns.
• Participated in regular training sessions about safety regulations specific to mine sites.
• Assisted in loading and unloading materials from mine cars to facilitate smooth operations.
• Inspected haul roads to ensure they were free from debris or hazardous conditions.
• Monitored the control panels for operation of conveyors, pumps, valves, and other related systems.
• Communicated effectively with co-workers, supervisors and contractors on site.
• Completed tasks assigned by supervisors within allotted time frames without compromising quality standards.
• Exercised continuous commitment to standards and regulatory training activities.
• Positioned and moved loads, responding to hand or audio signals from crew members.
• Located underground services, pipes, and wires prior to beginning work.
• Maintained documentation of receiving records and rail car seals to maintain traceability.
• Executed equipment operations safely, following regulations, policies and procedures.
• Conducted weekly rail scale inspections and daily weight car verifications.
• Operated locomotive, track mobile and forklift to support production.
• Checked and corrected levels of excavated materials against specifications.
• Maintained equipment on-site with regular maintenance and repairs.
• Reviewed written instructions regarding material movement and excavation to follow specifications.
• Conducted routine maintenance checks on coaxial cables to detect any faults or issues.
• Maintained accurate records of all services provided and materials used during splicing operations.
• Repaired damaged sections of cable with minimal disruption to service availability.
• Worked closely with clients in order to understand their specific requirements for the job at hand.
• Identified and resolved complex technical problems related to coaxial cables.
• Created detailed reports documenting all testing results for each spliced cable connection.
• Troubleshot difficult system malfunctions that could not be solved through standard procedures.
• Provided technical assistance in the installation of new equipment related to coax splicing operations.
• Fabricated custom length jumper assemblies from various types of coaxial cables as needed.
• Analyzed existing networks and identified areas needing improvement regarding signal strength or speed.
• Installed, tested, maintained and repaired aerial and underground coaxial cables.
• Performed quality control tests on all coaxial splices to ensure optimal performance.
• Executed detailed measurements of cable parameters using specialized tools and instruments.
• Monitored inventory levels of supplies necessary for Coax Splicer operations and ordered additional items as needed.
• Programmed and configured remote access devices such as modems and routers in order to establish a reliable network connection with customers' premises.
• Ensured that all work performed was compliant with local codes and regulations pertaining to safety standards.
• Utilized specialized tools such as fusion splicers, power meters, and optical time domain reflectometers when working with fiber optic cables.
• Assisted in providing training to other technicians on proper methods for installing and troubleshooting Coax Splicers.
• Inspected existing coaxial cable systems for any potential problems or damages.
• Developed comprehensive plans for the installation of new coaxial cabling systems based on customer needs.
• Pulled lines to proper tension for safety and durability of installation work.
• Handled multiple simultaneous deployment projects against strict deadlines.
• Strung cables between newly installed or existing poles and restrung cables due to damage or sagging.
• Worked with truck-mounted reels to complete large installation projects.
• Communicated with customers to access work areas and explain work.
• Installed, set up, and repaired devices and system components.
• Completed line work at heights using bucket trucks and underground using access points.
• Established and modified networks and computers at businesses, schools, government buildings, medical facilities, and homes.
• Managed time effectively to ensure tasks were completed on schedule and deadlines were met.
• Identified needs of customers promptly and efficiently.
• Operated a variety of machinery and tools safely and efficiently.
• Recognized by management for providing exceptional customer service.
• Worked with cross-functional teams to achieve goals.
• Demonstrated strong problem-solving skills, resolving issues efficiently and effectively.
• Operated equipment and machinery according to safety guidelines.
• Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
• Utilized advanced technical skills and expertise to troubleshoot complex problems and implement solutions.
• Exceeded customer satisfaction by finding creative solutions to problems.
• Updated and maintained databases with current information.
• Completed routine maintenance and repair.
• Completed day-to-day duties accurately and efficiently.
• Promoted high customer satisfaction by resolving problems with knowledgeable and friendly service.
• Conducted testing of software and systems to ensure quality and reliability.
• Collaborated closely with team members to achieve project objectives and meet deadlines.
• Achieved cost-savings by developing functional solutions to problems.
• Performed tests on existing electrical systems to ensure safety regulations were met.
• Identified underground utility lines through the use of specialized locating equipment.
• Verified accuracy of survey results by comparing information from multiple sources.
• Conducted regular maintenance checks on equipment used for underground utility locating operations.
• Inspected utilities prior to excavation, and identified potential risks.
• Utilized ground penetrating radar technology to identify subsurface structures without disturbing them.
• Adhered to Occupational Safety and Health Administration standards while working in confined spaces.
• Investigated complaints related to suspected damage caused by construction activities near underground utilities.
• Determined appropriate methods for excavating around existing underground utilities.
• Examined site plans, aerial photographs, and other documents prior to beginning a job.
• Accurately documented all findings on blueprints or maps for future reference.
• Directed traffic away from areas where work is being conducted near roads or highways.
• Communicated with clients regarding any changes in the plan due to unexpected utility locations.
• Reported any unsafe conditions observed during the course of work activities.
• Operated vacuum excavation equipment when necessary to uncover shallowly buried lines.
• Assessed the depth of buried utilities by using a variety of tools such as probes and sondes.
• Ensured that all work was performed according to local codes and regulations.
• Provided detailed reports on findings for client review and approval.
• Researched records at local public works departments to locate underground utilities.
• Collaborated with other workers such as plumbers, electricians, and contractors during the process of locating utilities.
• Located and determined depths of underground facilities and lines using equipment.
• Completed inspections on utilities to assess safety and compliance with applicable regulations.
• Identified and sketched locations of utility lines and marked areas of existing utilities for future usage.
• Designated potential locations for new lines based on utility lines already in place.
• Trained new locators on industry-specific software and tools.
• Used paint, flags and other methods to communicate utility information to excavators and other appropriate personnel.
• Searched for underground utilities in various weather conditions and notified supervisor of field issues.
• Used tools, equipment and vehicles to avoid injuries and mishaps.
• Located underground utilities prior to work being completed.
• Filled out daily paperwork based on locations and findings for delivery to professionals.
• Responded to emergency situations quickly that arose following illegal excavations and provided effective remediation.
• Set up modems and other hardware with necessary cables.
• Laid out cabling plans and ran through buildings to desired locations.
• Documented installation records in a timely manner.
• Organized and coordinated resources required for successful completion of jobs.
• Ensured that safety standards were met during installation processes.
• Prepared detailed reports on completed projects for management review.
• Calibrated test equipment to verify accuracy of readings.
• Inspected and tested fiber optics equipment to ensure optimal performance.
• Built out new fiber runs for customer connections.
• Assisted with the development of new technologies related to fiber optics.
• Troubleshot and repaired fiber optic systems.
• Programmed optical power meters to perform loss measurements.
• Maintained documentation of all network changes and repairs.
• Worked with other technicians as part of a team on large projects.
• Handled fibers for device routing, ribbon breakouts, component assemblies and custom splicing projects.
• Climbed poles and entered tunnels, buildings, trenches or manholes to accomplish various job tasks.
• Connected wires and cables to terminals and attached and detached various kinds of hardware to wires, cables, buildings or poles.
• Installed outside plant fiber optics in manhole and telco boxes.
• Performed regular maintenance checks on telecom equipment to ensure proper functioning.
• Troubleshot network issues to identify root causes of problems.
• Resolved customer complaints regarding telephone service or technical issues.
• Recommended solutions for resolving customer complaints concerning telephone service or technical issues.
• Replaced faulty components in telecommunications systems as needed.
• Installed and maintained telecommunications systems, including routers, switches, and related hardware.
• Responded quickly to emergency situations involving telecommunications systems malfunctions or outages.
• Read and interpreted technical drawings, maps and blueprints prior to starting tasks.
• Disassembled equipment, inspecting and tested wiring to locate and repair problems.
• Ensured compliance with federal, state, and local regulations regarding telecommunications systems.
• Evaluated new telecommunications technology and made recommendations for system improvements.
• Managed project timelines and budgets for telecommunications installations and upgrades.
• Provided on-call support for critical issues, ensuring high availability of telecommunications services.
• Measured, cut, spliced and installed wires and cables.
• Managed installation of fiber optic cables and systems, ensuring compliance with industry standards.
• Analyzed technical manuals and diagrams to determine proper connections for data communication lines.
• Installed and repaired distribution racks and cables.
• Ran wires between components and to outside cable systems.
• Climbed poles and ladders to install, maintain or inspect equipment.
• Tested repaired, newly installed or updated equipment to drive proper function and conformance to specifications.
• Managed multiple tasks simultaneously while ensuring accuracy at all times.
• Supervised the daily activities of a team of workers engaged in earthmoving operations, including grading, excavating, and backfilling.
• Assisted in the preparation of construction sites by performing various tasks such as clearing and grading land, excavating soil, and loading and unloading materials.
• Provided guidance to personnel responsible for excavating in areas where there are potential conflicts with existing utilities.
• Operated a variety of hand and power tools to complete tasks such as sawing, drilling, hammering, and excavating.
• Utilized various software and tools to streamline processes and optimize performance.
• Conducted routine maintenance and repairs on mechanical systems and industrial equipment.
• Maintained updated knowledge through continuing education and advanced training.
• Provided support and guidance to colleagues to maintain a collaborative work environment.
• Managed inventory and supplies to ensure materials were available when needed.
• Performed regular maintenance checks on equipment used in the warehouse.
• Reported any issues or concerns related to damaged products or incorrect item placements.
• Operated a forklift to move pallets of packages around the warehouse.
• Loaded and unloaded large freight from trucks using a hand truck or dolly.
• Performed routine maintenance on equipment used in the warehouse.
• Collaborated with other team members to meet tight deadlines when necessary.
• Managed inventory levels within the warehouse and reordered supplies as needed.
• Performed regular inspections of equipment and machinery used in production during night shift hours.
• Coordinated with vendors for supply deliveries, ensuring accuracy in order fulfillment.
• Evaluated and performed equipment maintenance to support operational goals.

I ran cnc machines two of them in a little bit of graphic design my duties were to keep the machines running bring material so I was a forklift certified and keep up with the maintenance to cnc machines there was multiple duties perform as keeping the area clean sweeping anything needed to keep it clean and safe keep material safe wish we use forklift to carry pallets small cranes and unload materials from the trucks or bring them from the inside to the side a little bit of computer work and management marriage people in the job need to get done acknowledge your reading maps and then these scripts need to get the job done keeping up with materials in stock materials

• Maintained, adjusted, and calibrated control systems and equipment to ensure optimal performance.
• Set controls to regulate speed, feed and coolant flow.
• Trained new employees on CNC machine operation, safety procedures, and company policies.
• Took measurements, detected malfunctions, troubleshot processes and adjusted and reprogrammed controls while adhering to quality assurance procedures and processes.
• Interpreted blueprints, drawings, and engineering information to determine methods and sequences of operations needed to fabricate products.
• Documented actions by completing production and quality logs.
• Set up and operated CNC machines to perform tasks such as drilling, grinding, and milling.
• Coordinated with other team members and departments to ensure timely completion of parts and projects.
• Loaded feed mechanisms by lifting stock into position.
• Verified settings by measuring positions, first-run part, and sample workpieces, adhering to international standards.
• Set-up and operated lathes, mills and grinders to cut raw materials.
• Used precision measurement tools to check and ensure the accuracy of the machined parts.
• Implemented minor machine maintenance such as cleaning and repairing.
• Completed accurate calculations of machine speed, feed ratios and cut parameters.
• Developed solutions to wide range of complex technical problems to meet organizational objectives and deadlines.
• Verified proper cooling and lubrication of workpieces during machine operation.
• Loaded and unloaded different tool parts from trucks and storage areas.
• Stopped machine operation to change tooling, setup, or workpiece placement according to required machining sequences.
• Maintained accurate records of production data including scrap rates and downtime.
• Collaborated with engineers in order to create new processes for improved efficiency.
• Operated multiple CNC machines simultaneously while adhering to safety protocols at all times.
• Provided feedback on product design changes based on experience operating the machinery.
• Performed minor maintenance such as cleaning and lubricating machines.
• Performed regular preventive maintenance tasks on CNC machinery.
• Checked accuracy of programs prior to running production runs utilizing simulation software packages.
• Adjusted machine feed and speed, changed cutting tools, adjusted machine controls as necessary during the run cycle.
• Loaded raw materials into production equipment according to job orders while maintaining proper inventory levels.
• Monitored machine operation to detect malfunctions or out-of-tolerance machining.
• Verified settings by measuring positions, first-run parts and sample works with micrometers, calipers or other measuring instruments.
• Analyzed engineering designs and determined most efficient sequence of operations.
• Ensured that all components met customer requirements before being packaged for shipment.
• Troubleshot issues related to tooling or programming errors using problem solving techniques.
• Read and interpreted blueprints, sketches, drawings, manuals, specifications or sample parts to determine dimensions and tolerances of finished work piece.
• Set up and operated CNC machines to perform repetitive machining operations on a variety of materials according to specifications.
• Identified opportunities for process improvement and increased efficiency.
• Maintained quality control by inspecting parts for conformance to specifications, using precision measuring instruments.
• Repaired damaged parts according to company standards before returning them back into service.
• Performed routine maintenance on machines and monitored usage to reduce parts breakdown.
• Established and performed quality assurance duties to maintain acceptable production levels.
• Changed out aging tools, fixtures and offsets.
• Worked from layout and work order, created programs and set up machines to produce required parts.
• Loaded and unloaded machines to prevent expensive equipment issues.
• Maintained production tooling by replacing and grinding worn tools.
• Read blueprints and 3D models to determine product specifications and plan operational sequences.
• Interfaced with machines to adjust settings or tools, driving high-quality production.
• Achieved safety, quality, and performance standards to meet production schedules.
• Worked with supervisor to debug and develop production processes and learn machine set-up skills.
• Kept parts within close tolerances of design standards to maintain optimal quality.
• Fabricated various parts using multiple machines at once.
• Observed company's strict safety rules during each shift to avoid job-related injuries.
• Provided expert coaching and training for new team members.
• Monitored and adjusted processes or equipment to improve quality and productivity.
• Leveraged micrometers, verniers and gages to accurately inspect parts.
• Selected the appropriate tools, machines, and materials to be used in preparation of machinery work.
• Adjusted machine feed and speed, changed cutting tools, or adjusted machine controls when automatic programming is faulty or if machines malfunction.
• Used devices, templates and fixtures to measure dimensions of finished workpieces for conformance.
• Followed safety guidelines and regulations, including wearing personal protective equipment and ensuring a safe work environment.
• Ensured the machines are properly lubricated and cooled during the machining process.
• Maintained specifications by observing drilling, grooving, and cutting, including turning, facing, knurling, and thread chasing operations.
• Managed the inventory of tools and parts necessary for machine operation and maintenance.
• Compared numerical displays with process sheet data to verify dimensional adjustments.